Opel/Vauxhall have developed and produced 2 different bodywork versions of the Corsa-B. This cannot be recognised from the outside and it is under the bonnet where this is visible. As the engine and gearbox supports are different because of the bodywork versions, it has an influence on the choice of engine support kit that is required. M-Tech kits are available for both bodywork versions and therefore it is very important that you order the right engine support kit from us.

You can see the difference between both body versions in the photos shown below. Open your bonnet and look at the engine support on your right hand side. (stand in front of the car, nose pointing towards the engine, it's the support on your left hand side.)

- If the support shown in the left photo looks like this then you have got bodywork version 1 (BV1).

- If the support shown in the right photo looks like this then you have got bodywork version 2 (BV2).
 

Body Type 1 (BT1)	Body Type 2 (BT2)

As a rule of thumb all Corsa-B GSi's and Corsa-B's with power steering are bodywork version 2. (Don’t forget to order the power steering pump support kit at a cost of £75)